Scissor lift 1500 KG CE

This scissor jack is suitable for lifting all types of cars, as long as its load capacity is not exceeded and its lift is sufficient.

Durable all-metal construction.

Quality mechanical processing.

Load capacity: - 1500 kg
Minimum lifting height - 100 mm
Maximum lifting height - 265 mm
GS / TUV quality certificate.

The jack can only be used for vehicles weighing up to 1500 kg. The functionality of the jack is guaranteed by the manufacturer from 85 mm to 370 mm according to the load characteristic of the working position.

NOTICE:
When lifting, it is necessary to secure the car against unwanted movement. Any handling under a raised car is prohibited, unless the vehicle is secured against falling by another suitable means besides a jack. style="font-size:14px;font-family:Roboto,sans-serif;" /> This device is intended for lifting only. The jack can only be used on a firm, level surface. Always secure the wheels and apply the parking brake of the lifted vehicle. Use the designated supports to support the vehicle. Do not load the jack more than its rated capacity. Before lifting the vehicle, make sure the jack is in good working order.
Instructions for use:
1. Before changing the wheel
- Park the vehicle on a flat, firm surface.
- For an automatic transmission, set the parking position, for a manual transmission, engage the reverse gear.
- Apply the handbrake and turn on the "turn signals".
- Block the front and rear of the wheel that is diagonally opposite the wheel you are going to change. (Example: when removing and installing the left front wheel, block the right rear wheel).
- Loosen the wheel bolts, but do not remove them.
- rotate the rod on the jack to raise the supporting part of the jack to the supporting edge of the vehicle. Place the jack under the support location specified by the vehicle manufacturer.
- Continue to raise the arm by turning the rod until it fits exactly on the designated surface.
style="font-size:12pt;font-family:Arial;font-weight:bold;font-style:italic;">2. Lifting the vehicle
- Raise the vehicle so that the wheel does not touch the ground for removal.
- Unscrew the locking screws and remove the wheel.
- Remove all dirt from the disc of the wheel that you are going to mount, especially from the bearing surfaces.
- Tighten each screw by hand only.
3. Starting the vehicle
- Lower the vehicle completely.
- Tighten all screws with a wrench.
- Remove the locking wedges from the locked wheel.
- Safely put away the dismantled wheel and jack, including used tools and accessories

MAINTENANCE, INSPECTION AND REPAIR
- Keep the lifter clean and regularly lubricate the corresponding moving parts with Vaseline every 3 months.
- Store the lift in the fully lowered position when not in use.
- Status check jacking should be done before each use. Cracked welds, damaged or missing parts can affect the correct operation of the jack and your safety.
- Due to the potential risk of injury, all adjustments to the jack are prohibited.