Spray rubber

Spray rubber provides a high-quality and flexible way to seal leaks and cracks on most building surfaces. It creates a durable and flexible protective film that reliably prevents moisture penetration, isolates the surface from water and protects against rust and corrosion. Can also be used on vertical surfaces.

Characteristics

• creates a flexible film
• prevents moisture, rust and corrosion penetration
• suitable for vertical and horizontal surfaces
• easy and quick application
• beginning of solidification after 20 to 30 minutes (surface peel)
• complete curing after 72 hours depending on the layer
• average consumption 0.8 m 2 per can

Use

• style="line-height:1.75;margin:0px;">concrete, resin and asphalt surfaces
• PVC, ceramic and wooden surfaces
• metal surfaces including galvanized aluminum surfaces

Application

The substrate should be cleaned as much as possible from grease, dust and loose particles. Shake the can thoroughly for at least 1 minute before application. It is recommended to apply 2 coats, applying from 8 to 20 cm from the surface. The first coat should be thinner. After approximately 15 to 30 minutes, apply a second, thicker coat.